Sale!

Rockey Precision Glock 17 CES Slide with RMR Cut

$149.99$179.99

(23 customer reviews)
Clear

Add Slide Parts Kit

Product total

Options total

Grand total

Categories: , , , SKU: RBG17CESRMR

Description

Rockey Precision Glock 17 CES (Chamfer Edge Slide)

Our slides are machined from 416R stainless steel billet stock and come ready to accept Glock OEM internals, barrels, and guide rods right out of the box. Rockey Precision slides offer increased accuracy and reliability over OEM slides by providing tighter tolerances making them a perfect fit for any 80 percent project or custom build.

Features of the Rockey Precision Glock 17 CES (Chamfer Edge Slide)

  • Front and Rear Cocking Serrations
  • Lowered ejection port
  • Iron Site Front and Rear Cuts
  • Critical interior dimensions are held to tighter than OEM specs
  • Cut from US Manufactured Stainless Steel Billet Stock
  • Two step finish aluminum oxide and glass bead blasted
  • Cerakote Finish
  • Compatible with all Glock 17 Gen 1-3 OEM and high quality aftermarket parts and accessories.
 
Our slides are made from US made steel, by US workers, in the USA. As such, we know our slides will stand up to any challenge.
*DISCLAIMER “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Rockey Brass is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product.

Additional information

Color and Finish

, ,

23 reviews for Rockey Precision Glock 17 CES Slide with RMR Cut

  1. Douglas Glidden

    This is the easiest company to buy from. Efficient and timely

  2. Paul

    Got my slide for Black Friday 2021. Everything fits and functions. But I am NOT impressed with the FDE finish. Dont know what kind paint was used to paint my slide but it is hard to wipe clean. I havent even shot my gun yet but the front and rear serrations are already dirty. Looks like a smudge of black grease that wont come off. Tried using lysol, windex and simple green. I should’ve stuck with an all Black slide.

  3. Patrick Connolly

    Purchased this slide along with the slide kit. Received it very quickly. Assembly went very smooth with no problems. Took it to the range and put a box of bullets through it. The brass hung up on the first round, cleared the brass and functioned perfectly after that. Looks great, and shoots great.

  4. Brian Hawc

    This slide is very well crafted and very clean. Assembly took a few minutes with no issues. Excellent price.

  5. Matthew

    Nice slide…. just wish RMR plate was avalible and included

  6. Ben White

    Purchased 2 of these to build P80 Glock clones. They worked great. Even when I used them on Glocks I already owned, they worked just as the original Glock slides. Bought standard slide completion kits for them and had no issues assembling. No mods required.

  7. Richard Benjamin

    Bought two of these slides and they are amazing.

  8. Brad Wiley

    My Trijicon SRO mounted easy to the RB slide but I have concerns. There’s a noticeable gap at the back of the optic between the optic and slide. Prior to mounting, the SRO is loose front to back and the only thing holding stopping the front to back motion is the the compression of the screws. I’m afraid my optic will not consistently hold zero. Other than the sloppy cut, it seems fine.

  9. Tyler Foster

    Comes with everything & is exactly what you want!

  10. DJ AUX

    Everything came quick, as described

  11. James Scott Windler

    Quality part, looks and works great, quick shipping, this is a company that I definitely will be dealing with in the future.

  12. Dale M. Lock

    The slide came quickly, and was exactly what I expected. Fit and finish look good. Waiting a parts kit. I will shop here again.

  13. Joshua Bennett

    Very good tolerances fits my holosun 507 perfectly and cycles perfect with it on there

  14. Kevin

    The small cylindrical features that the RMR rests on sheared off and sent my RMR flying after about 300 rounds. The rest of the slide is great, easy to manipulate from the front serrations and well machined internals. Just wish the RMR could have held better.

  15. Steven B

    Nice slide. RMR cut fit my Holosun 507. Very happy.

  16. Robert Longoria

    The slide I received was disappointing. The finish is rough, the cut on the slide for the slide release is poorly machined and looks wavy…which causes it to be unable to release the slide with your thumb or even both thumbs. The cuts on the inside are poorly finished and when compared to an OEM slide you can see the significant difference. Lesson learned buying from the second page of google. Josh from customer service was much less helpful and although answered my questions did not do so satisfactorily. The “enhanced” upper parts kit seems ok but i have never seen the coating on a spring flake off by touching it with your fingers. Josh said this was normal and would be fine…still not the quality Id trust in the future. The slide cut insert came damaged on the edge…Im sire these things such as the machining marks don’t or maybe they do affect the function of the firearm…but the poor finishing quality and lack of QC before it ships out makes me seriously reconsider purchasing from Rockey in the future.

  17. John

    Quality slide! I ordered a 17 slide with the RMR cut and ceracoated in silver satin. I assembled it with the Rockey brass upper parts kit and a stainless threaded barrel. Put it on my lower and it has functioned great. Recently added a Holusun RMR and it went on perfectly. I like that Rockey brass included extra screws for the RMR plate. I have already ordered more stuff from here. Thanks!

  18. Geoff

    Excellent kit sold by an excellent company. I discovered a mis-match in my order and emailed the problem at 9:30 pst on a Friday night By 6am pst Saturday morning there was a response to my email with a tracking number for the replacement part. By Monday I had what I needed with a postage paid return envelope for the erroneous part. I have NEVER experienced such professional, responsive service anywhere! They have a loyal customer in me.

  19. SLNTSCPE

    This slide is perfect and fits tighter than the factory which has more wiggle , in the beginning I thought that the rear iron sight cut was too far to the back but actually gives it a sweet squared off look (with most night sights) that compliments the chamfered slide.

  20. Ron Jackson

    This is a great slide for the money works great used 500 rounds so far. got this with the full build kit.

  21. Derek

    I put this on a P80 build and so far it has worked flawlessly. I used all OE Glock parts and worked fine however the channel sleeve was kinda tight but this is probably secondary to cerakote. The front rails seem kinda tight (this does have somewhat tighter tolerances than OE Glock) but this could be due to the P80 frame. This tightness does not appear to affect function. I have not added an RMR yet so I cannot attest to the possible fitment. I wanted an RMR slide without any other cuts and this fit the bill nicely. I would recommend this slide and will be purchasing more. Great price and fast shipping!

  22. Timothy Green

    RP Precision Glock 17 CES fit and works well On Glock 17 Polymer 80% lower.

  23. Darrell

    I got this slide on sale to finish off my first Poly80 build. During the build I was plagued with issues of poor quality parts so I was surprised with the overall quality. Finish was done well and looks great. Realize that you’ll need to install a firing pin channel liner as it’s bare. Multiple screws for the RMR slot is a nice touch too. Thanks for selling a great product.

Add a review

Your email address will not be published.

Post comment